Page Comparison

JobFile set up instructions for ClickHome builders. This will configure the builders account so that all of their suppliers and contractors receive a JobFile url in their call up emails and can respond accordingly.

Step-by-step guide

ClickHome 3

1. Obtain an appropriate email address from the client which will be the main account/license holder as well as a first and last name for the account;

2. Create an account in JobFile;

3. Go to: http://jobfilepublictestap-env.elasticbeanstalk.com/JobFile/Registration

4. Click ‘Sign Up - Free’;

5. Enter the following fields as a minimum;

1. Company Name;

2. Email Address;

3. Password/Confirm Password (NOTE: the password cannot be ‘password’ and must be at least 6 characters);

4. Users Full Name;

6. Click next and accept the terms in the license agreement, then click confirm;

7. An email will be sent to the client, they need to verify their email addresses by clicking on the link in this email;

8. Once this has been done you can apply the correct settings in ClickHome;

9. You will need to login to the client portal as an admin and go to: Administration > System Configuration > Configuration and System Settings.

10. Add all 4 of the following entries:

    1. ClickHome.JobFile.WebServiceURL:

       If using version 32 or below http://jobfilepublictstapi-env.elasticbeanstalk.com/V0

       If using version 33 or above http://jobfileapiv1publict-env.elasticbeanstalk.com/api/ 

       NOTE: ensure there are no spaces before or after these links once pasted into ClickHome

    2. ClickHome.JobFile.UserId: username/email address you created for the JobFile Account;

    3. ClickHome.JobFile.Password: password used for the JobFile Account;

    4. ClickHome.JobFile.JobFileQueueId: maxiumum value from idExportQueue in tblExportQueues (for now this will be manually obtained by JobFile Team - in future it will be generated in JobFile Admin module of the UI)

    5. ClickHome.JobFile.RegisterMode: Version 33 and above ONLY: 
       0 = nothing, 1 = external all, **2 = external but does not load any supplier with 'NOJobFIle' (see below), 3 = all
       NOTE: Ensure there is only 1 register mode entered and it is set to bStdActive = 1

11. Then click save and setup will be complete.

...

1. Apply same steps as as above (ClickHome 3) except the below information needs to be entered in the database instead of the user interface;
   Configure in tblValidationEntries:
   a. ClickHome.ClickHomeLive.ServerUrl
   b. ClickHome.ClickHomeLive.ServerUserName
   c. ClickHome.ClickHomeLive.ServerPassword
2. See below link in FogBugz or instructions beneath if link doesn't work.

http://apps.imagemation.com/FogBugz/default.asp?W512

OR;

Support for ClickHome2 JobFile Connector - Installing JobFile

...